<nav id="5l4w8"></nav>

    <sub id="5l4w8"><td id="5l4w8"></td></sub>
  1. <form id="5l4w8"></form>
    <dd id="5l4w8"><address id="5l4w8"></address></dd>

    <sub id="5l4w8"><table id="5l4w8"><span id="5l4w8"></span></table></sub>
  2. <form id="5l4w8"></form>
    1. <wbr id="5l4w8"><legend id="5l4w8"><dl id="5l4w8"></dl></legend></wbr>
      <tr id="5l4w8"><source id="5l4w8"><s id="5l4w8"></s></source></tr>
    2. You are here: Home>Products>New product series

      MB068-II automatic cloth machine
        Laboratory textiles and clothing, rubber, plastic, leather, toys, paper testing and sample preparation field, can be prepared for physical properties, chemical projects and other testing required samples.
        1. The two working modes are suitable for different sample preparation.
        2. The two cylinders of gas and oil are combined with pressure, and the work is quiet and no noise.
        3. Multiple security protection: hands button switch; infrared induction; tool mode installation status hint; lower template installation status hint; screen soft switch.
        4. It can be separately connected to air compressor, and also can be connected with a centralized gas supply device.
        5. The pressure speed and time can be adjusted to meet the needs of different samples.
        6. With DM series knife die, samples of different sizes and sizes can be prepared.
        7. Special cleaning air gun to prevent cross contamination of samples.
        8. The initial angle and angle of rotation can be set.
        Pressure plate diameter
        20×20cm
        Pressure
        4kg/cm2
        Sample size
        According to the requirements of different testing, the samples of different sizes and sizes can be produced with the tool die, minimum sample size5mm×5mm
        Sample making efficiency
        One complete sample making process:about 20s;sample weight:according to the material of the sample and the knife die. In the production of 5mm×5mm textile sample time,we can make about 20g at one time,at the same time to meet the pH value, formaldehyde, azo, composition, pesticide residues and other quantitative test project needs
        Maximum working pressure
        10 ton,the pressure of working gas is not less than 0.5MPa
        Shape size
        500×400×1200mm
        Weight
        200kg
        Rotation angle adjustable
        30°-180°
      Copyright © 2017 Quanzhou Meibang Instrument Co., Ltd. Address:Quanzhou Fujian ICP:閩ICP備10202419號-1